Underfloor Heating

Inertia deposit

We have vertical ground mode, horizontal ground mode and also vertical wall mode if the capacity is up to 200 L.

Complete with:

Protection locks with built-in flowmeters (0-4 l / min)

Manual regulation valves prepared for electrothermal heads

No. 2 1" blind plugs with O-ring gasket

No. 2 1/2" water drain valves

Nr. 2 1/2" air vent valves with vent (side + manual)

No. 2 double metal supports

Note: to be completed with nr. 2 Progress 1" ball valve with red and blue butterfly handle, with pipe union, with or without thermometer (not included).

Complete with thermostatic head with immersion probe.

Wilo Yonos For RS 25/6

Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm

Complete with thermostatic head with immersion probe

Wilo Yonos For RS 25/6

Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm

Wilo Yonos For RS 25/6

Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm

Complete with: circulator pump, head, thermostat

The hydraulic group is a low-temperature system controlled by a fixed-point thermostatic controller that determines a constant flow temperature for the underfloor heating circuit. It incorporates a contact thermostat system to be placed in the outflow pipe, which must precede the electrical supply of the circulating pump, and it stops it if the temperature exceeds the determined value. The valve has an integrated low temperature hydraulic circuit, most of the return circuit is routed to send to the circuit. The mixing group allows maintenance of the circulator without the need to empty the circuit.

Suitable for recessed installation with adjustable depth for 80 and 120 mm partitions.

Suitable for:

- Topway distributors from 1" to 1" 1/4

- Floor control unit HE, TM3-R and Firstbox units

- Thermal energy consumption measurement modules, with key lock purchased separately.

ISO 228/1 threads - Reduced passage - Thermometer scale from 0 to 80 ° C

It can also be combined with Topway manifolds using the black O-rings provided in the package.

The opening takes place with the power supply controlled by the thermostat - Absorption 3.45 VA (230 V) 3 VA (24 V) - Protection IP 40 (vertical position IP 44) - Cable length: 1 m - Starting current: 0 , 35 A (24 V model) - 0.25 A (230 V model) - Opening / closing time: 5-6 min.

Support curve for pex tube

The base thermoplate for Radiant Floor is made of EPS (Expanded Polystyrene). Molded and microcast using water vapor, achieving total water impermeability.

Each box contains 11 pcs.

Caixa de Clip de fixação para piso radiante 240 unidades.