Central Heating Install.
-
Grupo controlador Clima MIX33
€993.272-WAY PUMP UNIT WITH 3-WAY MIXING VALVE WITH BUILT-IN BY-PASS AND BUILT-IN CLIMATIC CONTROLLER FOR ONE MIXED HEATING CIRCUIT
Climatic control pump unit for a mixed heating system, control of boiler contact 0-10 V or PWM (heat source) for starting and switching off.
It is possible to connect one each other several hydraulic modules via CANBus and to connect the °Caleon room controller. The pump unit, by acquiring the value of the outside temperature, settles the right supply temperature of the installation on the base of the set climatic curve.
The unit is supplied completely assembled and tested. No wiring operations are needed: the circulating pump, the actuator of mixing valve and the climatic controller are pre-wired for a pratical and effective installation.
-
Hydraulic group central heating M2
€338.30The hydraulic group is a low-temperature system controlled by a fixed-point thermostatic controller that determines a constant flow temperature for the underfloor heating circuit. It incorporates a contact thermostat system to be placed in the outflow pipe, which must precede the electrical supply of the circulating pump, and it stops it if the temperature exceeds the determined value. The valve has an integrated low temperature hydraulic circuit, most of the return circuit is routed to send to the circuit. The mixing group allows maintenance of the circulator without the need to empty the circuit.
-
Grupo hidráulico sem coletor TM3-R c/Kit segurança
€438.25Wilo Yonos For RS 25/6
Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm
Complete with: circulator pump, head, thermostat
-
Grupo hidráulico sem coletor TM3-R
€369.42Complete with thermostatic head with immersion probe
Wilo Yonos For RS 25/6
Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm
-
Radiant floor collector stainless steel 1" w/ flowmeter
€131.59Complete with:
Protection locks with built-in flowmeters (0-4 l / min)
Manual regulation valves prepared for electrothermal heads
No. 2 1" blind plugs with O-ring gasket
No. 2 1/2" water drain valves
Nr. 2 1/2" air vent valves with vent (side + manual)
No. 2 double metal supports
Note: to be completed with nr. 2 Progress 1" ball valve with red and blue butterfly handle, with pipe union, with or without thermometer (not included).
-
Grupo hidráulico com coletor TM3-R
€548.58Complete with thermostatic head with immersion probe.
Wilo Yonos For RS 25/6
Connections - takeoffs: G1 ”1/2 - 130 mm - Rotation speed: 800 ÷ 4250 rpm
-
Underfloor heating valve kit 1"
€47.92ISO 228/1 threads - Reduced passage - Thermometer scale from 0 to 80 ° C
It can also be combined with Topway manifolds using the black O-rings provided in the package.
-
Towel radiator
€217.71Towel radiators in steel and chrome are the ideal heat emitters for heating the bathroom, as well as for drying and heating
-
Radiador Modelo CB600
€11.16This aluminum alloy used is a guarantee with regard to quality and compliance with standards, offering good thermal conductivity, mechanical resistance, durability and corrosion resistance.
-
Radiador painel plano vertical
On requestFLAT STEEL PANEL RADIATOR is suitable for any home or commercial construction project.
Available in single panel models, the FLAT STEEL PANEL RADIATOR offers economical, fast and efficient performance.
THE FLAT STEEL PANEL RADIATOR is equipped with integrated side panels. All radiators are supplied ready for installation.
VERTICAL STEEL FLAT PANEL RADIATORS are supplied with optional retention for added security.
Made under; BS EN ISO 9000 quality standards.
Complete with installation package including:
- Brackets, screws, ventilation openings and bushings.
- N° 4 fixing connection points, ½ inches
- Pressure tested to 10 bar.
- 10 year warranty.
- Glossy white finish (RAL 9016)
-
Radiador painel plano horizontal
On requestFLAT STEEL PANEL RADIATOR is suitable for any home or commercial construction project.
Available in single panel models, the FLAT STEEL PANEL RADIATOR offers economical, fast and efficient performance.
THE FLAT STEEL PANEL RADIATOR is equipped with integrated side panels. All radiators are supplied ready for installation.
Made under; BS EN ISO 9000 quality standards.
Complete with installation package including:
- Simple panel;
- 1 convector;
- 3 different heights and 12 different widths;
- Supports, screws, ventilation openings and bushings;
- N° 4 fixing connection points, ½ inches;
- Pressure tested to 10 bar;
- 10 years warranty;
- Glossy white finish (RAL 9016).