Recuperator

Automatic pellet KIT for CARINCI stove, available for the right and left sides.

The CARINCI modulating flame burner allows the customer to operate it at both constant and variable power. The regulation automatically modulates the flame, lowering itself at minimum speed, reducing consumption by up to 50%.

The CARINCI multi-fuel stove is a true poly-fuel biomass boiler, which can be fed with firewood, pellets, hazelnut husks and other crushed fuels, always guaranteeing maximum heating with very low operating costs.

This equipment has the pellet silo on its right, being to the left of the viewer

For this product, you can have the help of a certified CLÁUDIO MARQUES technician, so that the first ignition can be made. (call: 238692209)

Wood-burning central heating stove with innovative Carinci combustion technique (exclusive system), the user places the large wood at the bottom and the smaller one at the top, igniting the wood above and then the flame spreads throughout the combustion chamber. This innovative combustion technique guarantees notable advantages such as heating autonomy for up to 8 hours, rapid central heating and domestic hot water.

It has ACQUAPLUS system by Carinci (exclusive system), allows you to have instant sanitary hot water even after the absence of fire for 10/12 hours.

Recuperator with 81% yield.

For this product, you can have the help of a certified CLÁUDIO MARQUES technician, so that the first ignition can be made. (call: 238692209)

Recovery with innovative combustion technique

The innovative CARINCI EVOLUTION 4.0 combustion technique (exclusive patented system no. 1371478) consists of a simple principle, heating the combustion air before letting it enter the combustion chamber.

The EVOLUTION 4.0 series has a system with two preheated combustion air inlets: primary air for combustion, secondary air for correct oxygenation throughout the combustion chamber.

The two phases of double oxygenation for the combustion of the CARINCI EVOLUTION 4.0 Stove allow you to burn wood efficiently, obtaining maximum efficiency.

Supported by firewood.

For water heating.

Thanks to its interior format, designed to obtain the greatest possible exchange. Innovative, well-placed heat exchangers, the flame is forced to go around them and give away all its heat before exiting through the chimney. It has a secondary air inlet.

Supported by firewood.

For water heating.

Innovative finned heat exchanger, well positioned, the flame is forced to go around it and give off all its heat before exiting through the chimney. The 6mm thick circular fins in special steel work as a heat absorber. Thanks to its interior format, designed to obtain the greatest possible exchange.

Optional frame for 700 stove in black.

Optional frame for 800 stove in black.

Optional beautifying bezel for Vision Heat Recovery

Optional trim ring for Vision Heater.

Pellet central heating stove

CM Adam pellet central heating stoves can be installed in almost all types of buildings and situations. For your coating, we can use traditional plasterboard, stone, masonry, etc. systems, or with our coatings specially designed and designed to facilitate installation.