PRESTIGE - Wood / Pellets
|
Model 270
|
Model 350
|
Model 500
|
Reference class EN 305-5: 2012
|
C1
|
C1
|
C1
|
Maximum permissible operating pressure - bar -
|
3
|
3
|
3
|
Test pressure - bar -
|
3
|
3
|
3
|
Combustion chamber capacity - lt -
|
50
|
50
|
80
|
Water content in the boiler - lt -
|
97
|
97
|
125
|
Mass of the equipment - Kg -
|
635
|
635
|
787
|
Smoke duct connection diameter - mm -
|
180
|
180
|
200
|
Minimum draft - Pa -
|
18
|
18
|
18
|
Operating temperature range ( min-max) - ° C -
|
55 + 90
|
55 + 90
|
55 + 90
|
Efficiency in nominal heat production -% -
|
89.84
|
89.84
|
89.84
|
Efficiency with reduced thermal energy -% -
|
89.22
|
89.23
|
90.75
|
Exhaust CO content ( nominal heat output) - mg / m3 -
|
298 ± 13
|
100.69 ± 13
|
102.00 ± 9
|
Exhaust CO content ( reduced heat production ) - mg / m3 -
|
128 ± 9
|
114.38 ± 13
|
121 ± 9
|
Dust content ( nominal heat output) - mg / m3 -
|
13.21
|
21.86
|
12.52
|
Dust content ( reduced thermal power ) - mg / m3 -
|
14.59
|
23.12
|
14.45
|
OCG at rated heat output - mg / Nm3 -
|
14.43
|
14.43
|
13.36
|
OCG with reduced thermal power - mg / Nm3 -
|
17.64
|
17.11
|
18.76
|
Nominal thermal power - KW -
|
27
|
34.9
|
49.5
|
Minimum / maximum thermal power - KW -
|
8.1 / 27
|
8.1 / 34.9
|
14.5 / 49.5
|
Pressure loss in the boiler - Pa -
|
2000
|
2000
|
2300
|
MANUAL BOILER ( CLICK HERE)
Combustion is the most important element in a fireplace, as any calorific value of wood that is not converted into energy is lost in performance.
The innovative CARINCI combustion technique (EXCLUSIVE PATENTING SYSTEM No. 1371478) consists of a simple principle, heating the combustion air before entering the combustion chamber.
HIGH IGNITION
The CARINCI fireplace stove, thanks to its exclusive innovative combustion technique, allows the user to load it by placing the large wood below, the small one above and lighting the fire above. This rapid ignition technique ensures homogeneous combustion, burning the wood from top to bottom, in a uniform and gradual manner, exploiting maximum fuel efficiency, significantly reducing smoke production and polluting emissions.
SYSTEM "A.Q.S."
The A.Q.S SYSTEM, designed by the Carinci Group, allows the collection of domestic hot water with little fire, at low temperatures (already at 40 ° C) and even with the fire extinguished for at least half a day after shutdown.
BENEFITS
- Easy loading
- Simplicity in ignition
- Diffuse flame
- Heating speed
- Wood preheating
- Heating autonomy
- Low pollutant emissions
- With a single load of wood for up to 6/8 hours of heating
- Leave with complete freedom and security without having to take care of him
- Practical and quick to clean
MULTI-FUEL BURNER WITH LOW FUEL SUPPLY
The innovative Carinci burner technology "Power from the Low" guarantees considerable advantages compared to traditional stoves, which are fed by the fall of pellets directly into the flame.
BENEFITS
- Can burn any type of wood pellet, even of low quality
- It can also burn other biomass
- Self-leveling burner
- Right amount of primary air
- Secondary air
- Preheated fuel
- Preheated primary and secondary air
- Constant combustion (no fuel falling on the flame)
- Ash expulsion in a natural way (not driven by the fan or mechanisms)
- Low daily maintenance for cleaning braziers
- Double glow plug (reduced ignition times)
AUTOMATIC REVERSE MOTOR - ANTI-LOCK - EXTREMELY QUIET
Automatic reversing motor safety: the CARINCI COMBI thermal imager gearmotor is equipped with a safety control with a reverse feed screw, which reverses the direction of travel automatically for about one turn, when a greater resistance is detected in the transport of the fuel. thus, the fuel is blocked to resume normal operation and, thus, avoiding the boiler blockage and any break in the fuel supply system.
ELECTRONIC IGNITION WITH SERIAL DOUBLE CANDLE
The electronic ignition with double spark plugs ensures fast, safe and constant ignition over time.
MANAGEMENT SOFTWARE
The control unit allows the ignition to be programmed automatically at any time.