|AUTOMATIC - Madeira / Pellets||Model |
|Maximum thermal power - kW -
|Normal thermal power - kW -
| Primary heating output power - kW -
| Air heating power - kW -
|Maximum water heating pressure - bar -
|Maximum sanitary water pressure - bar -
|Boiler water content - lt -
|Weight - Kg -
|Minimum draft - Pa -
|| 12 ± 2
||12 ± 2
||12 ± 2
||12 ± 2
|Mass gas flow - g / s -
|Performance - % -
| Co 13% O2 - lt -
|Normal flue gas average output temperature normal function - ° C -
|Maximum fume temperature On exit from normal function - ° C -
|Average safety outlet temperature- ° C -
|Maximum safe flue gas output -° C -
SMOKING STAGES WITH EFFICIENT EFFICIENCY BEYOND 81% WITH MANDATORY VARIETY ROUTE.
It can be customized with hoops on request.
Combustion is the most important element in a fireplace, as all the calorific value of wood that is not converted to energy is lost in performance.
The innovative CARINCI combustion technique (EXCLUSIVE PATENTING SYSTEM No. 1371478) consists of a simple principle, heating the combustion air before it enters the combustion chamber.
The CARINCI fireplace stove, thanks to its unique and innovative combustion technique, allows the user to charge it by placing the large wood at the bottom, the small one above and lighting the fire from above. This rapid ignition technique ensures homogeneous combustion, burning the wood from top to bottom, evenly and gradually, exploiting maximum fuel efficiency, significantly reducing the production of smoke and pollutant emissions.
The A.Q.S SYSTEM, designed by the Carinci Group, allows the collection of domestic hot water with little fire, at low temperatures (already at 40 ° C) and even with the fire extinguished for at least half a day after the shutdown.
- Easy loading
- Simplicity in ignition
- Diffuse flame
- Heating speed
- Wood preheating
- Heating autonomy
- Low polluting emissions
- With a single load of wood up to 6/8 hours of heating
- Go out with complete freedom and security without having to take care of it
- Practical and quick to clean
MULTI-FUEL BURNER WITH LOW FUEL SUPPLY
The innovative Carinci "Power from the Low" burner technology guarantees considerable advantages compared to traditional stoves, which are fed by dropping pellets directly into the flame.
- Can burn any type of wood pellet, even low quality
- It can also burn other biomass
- Self-levelling burner
- Right amount of primary air
- Secondary air
- Pre-heated fuel
- Preheated primary and secondary air
- Constant combustion (no fuel falling on the flame)
- Natural ash expulsion (not driven by fan or mechanisms)
- Low daily maintenance for cleaning braziers
- Double glow plug (reduced ignition times)
AUTOMATIC INVERSION MOTOR - ANTI-BLOCK - EXTREMELY QUIET
Automatic reversing motor safety: The CARINCI COMBI thermal imager motor reducer is equipped with a safety control with a reverse feed feed screw, which automatically reverses the direction of travel for about one revolution when greater resistance is detected in the transport of the fuel. thus, the fuel is blocked to resume normal operation and thus avoiding boiler blockage and any breakdown of the fuel supply system.
ELECTRONIC IGNITION WITH STANDARD DOUBLE GUN
Electronic ignition with double spark plug ensures quick, safe and constant ignition over time.
The control unit allows the ignition to be programmed automatically at any time.